ES120 Pure Power Plug-In Technical Specifications
Pure Power Plug-In Highlights
-
120 Volt Single Phase Electricity Conditioner
-
Unit Size 5.25” x 3.75” x 2”
-
Low Power Losses, < 0.5 Watts per 1000 VAr
-
Operating Temperature Range of -55°C to +90°C
-
General Enclosure: Plug-in Unit
-
Circuit Zone Electrical Protection
-
Self-healing metalized Harmonic Rectifiers
-
NEMA 5-15 plug (two flat parallel blades w/ ground pin)
-
EMI/RFI Noise Reduction 0-50 db
-
Power Factor Compensation
-
Voltage Moderation
-
Robust Integrated Surge Suppression
-
Electrical Harmonics Elimination (THD Reduction)
-
EMF/EMR Elimination
Pure Power Plug-In Characteristics
Max AC Voltage (Charge Potential): 300 Volts
Single Phase Voltages Available: 120 Volts, USA (300 Volt L - N MAX)
Input Power Frequency: 50/60 Hz
Current Requirements @ 120 Volts: 0.85 Amps
Operating Temperature: -55°C to +90°C
Operating Humidity: 5% to 95%, Noncondensing
Operating Altitude: Up to 16,000 ft (5000m)
Seismic Withstand Capability: (Meet or Exceed Specifications) IBC 2006, CBC 2007, & UBC Zone 4
Harmonic Rectifier Circuit Qualities
Total Unit Reactive Power @ 300 V (L1-N): 20 μF
Per Circuit Reactive Power @ 300 V (L1-N): 20 μF
Reactive Bank Composition: 6 PFC Modules
Harmonic Dissipations - PFC Module Specs.
Tangent of Loss Angle; C > 1 μF at 1 kHz: <= 30 * 10
Rated Voltage Pulse Slope (dV/dt); P=22.5mm: 150 V / μs
RC Between Leads: >5000 s
Withstanding(DC) Voltage (Cut-off Current 10 mA): 1850 V
EMI/RMI Filtering Attenuation: Up to 50 dB from 10 kHz to 100 MHz
Protection Modes: (L1-L2 & L1-N & L2-N)
-4
Surge Suppression
Voltage (Continuous) 250 Volts
424 Volts
(Max Clamping) 650 Volts
Current (Peak Surge) 6.5 kAmps
(Rating) 6500 Amps
Transient Dissipation Potential Each Circuit (Surge Energy): 1300 Joules/μs
Protection Modes (Single Circuit): L1-N
RMS
DC
RMS
Description/Code
-
Made in Montana
-
Made in USA
-
UL - E337361 - Closed Energy Management Equipment 3ZJ9
-
FCC - Approved (UL Tested for Compliance)
-
CE - Low Voltage Directive 2006/95/EC
-
CE - Electromagnetic Compatibility (EMC) 2004/108/EC
-
RoHS - Lead Free - Restriction of Hazardous Substances